Preloader Close
s a n i t o
  • Location
    479 Warrigal Road Moorabbin VIC 3189
  • Phone: 03 9555 7876
    Email: info@greenzonebarrier.com
  • Contact us
  • Location
    479 Warrigal Road Moorabbin VIC 3189
  • Phone: 03 9555 7876
    Email: info@greenzonebarrier.com
  • Contact us

COMPLETE UNDERSLAB

Sheet 2m wide per roll

SKU:00000

100-200um plastic sheet, 2m wide in a roll length of 50m. Neutral (clear) is the preferred colour. It is perforated to suit the Altis system.The plastic sheet used is manufactured to the requirements as set out for Vapour Barriers in AS2870 of 2000. Suitable for use in full underslabs

Dripper line per lineal meter

SKU:00002

 

The dripper line is of lilac pigment and contains injection moulded emitters spaced 150mm apart. Suitable for use in full underslabs. This dripper line is used in all pre made products.

INTERNAL PERIMETER PRE-MADE

600mm x 50m Roll

SKU:00003

 

This is a 600mm wide perforated plastic sheet, fitted with 2 (two) runs of the dripper line fixed to the sheet. Each runs of dripper line is spaced at 300mm apart with each run 150mm in from the outer edge. This is in a roll 50m in length. Suitable to form the horizontal barrier of the internal perimeter of slab and cover service penetrations for slab on ground construction. Roller sold separately.

300mm Perforated x 50m Roll

SKU:00053

 

Suitable to form the horizontal barrier of the internal perimeter of slab and cover service penetrations for slab on ground construction. This is a 300mm wide perforated plastic sheet, fitted with 1 (one) run of the dripper line fixed to the sheet. This run of dripper line is in centred with this run 150mm in from the outer edge. This is in a roll 50m in length. Roller sold separately.

EXTERNAL PERIMETER PRE-MADE

150mm x 50m Roll

SKU:00004

 

This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet. The run of dripper line is centred with this run 75mm in from the outer edges. This is in a roll 50m in length. Suitable for barriers at a depth 0 -100mm, using the 150mm perforated in the horizontal plane. Roller sold separately.

300mm Unperforated x 50m Roll

SKU:00005

 

This is a 300mm wide unperforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet. The run of dripper line is 75mm in from one outer edge. The dripper line can be at the base if the sheet can cover the full trench or on the outer soil wall, being 75mm below the finished soil level. This will form a treatment area 150mm wide and to a depth of 300mm. This is in a roll 50m in length. Suitable for barriers at a depth 100-300mm, using the 300mm unperforated as a dam wall. Roller sold separately.

DRIPPER LINE FITTINGS

Inline joint

SKU:00009

 

Suitable fitting to join two pieces of dripper line together. No clips required as the blue slip lock joints provide the necessary seal. Sold in bags of 25.

Stop end

SKU:00010

 

Stop end Suitable fitting to put on the dripper line at the end of a run. No clips required as the blue slip lock joints provide the necessary seal. Sold in bags of 25.

90º joiner

SKU:20001

 

Suitable fitting to put on the dripper line to go around 90° corners. No clips required as the green slip lock joints provide the necessary seal. Sold in bags of 25.

T joint

SKU:20002

 

Suitable fitting to link the dripper line into penetrations also can be used to go around external pipes and penetrations. No clips required as the green slip lock joints provide the necessary seal. Sold in bags of 25.

450/1350 joint

SKU:20035

 

Suitable fitting to put on the dripper line to go around bay windows. No clips required as the green slip lock joints provide the necessary seal. Sold in bags of 25.

PURPLE MANIFOLDS

Multi Manifold single/double 150mm take off

SKU:20054

 

Suitable to link the system to a pump up point. For an external perimeter installation for up to 100Lm. Pre-assembled single/ double Manifold kit complete with 4 X 25mm herbie clips all in a bag. Sold individually.

Purple Manifold complete double 600mm take off

SKU:20053

 

Suitable to link the system to a pump up point. For an internal perimeter installation for up to 100Lm. Pre-assembled double Manifold kit complete with 4 X 25mm herbie clips all in a bag. Sold individually.

PUMP UP FITTINGS

Square pathway trap

SKU:00031

 

This is to allow the manifold pump up point to be concealed. This is lockable and is the recommended pathway trap. It comes with 2 screws and requires an Allen key to tighten.

Pump up tags

SKU:20023

 

This tag can be attached to the manifold to indicate the length of dripper line runs that have been installed. It enables you to ensure that the system is not under or over serviced when charging with termiticide.

OTHER PRODUCTS

Wall plates

SKU:00038

 

As part of the CSIRO opinion for systems installed in QLD where a concrete mowing strip is prescribed. Use of the wall plates allows the system to be installed without a mowing strip. These must be placed on each face of the perimeter of the building.